欢迎您来到RONGAN-Man网站！
CALL TO SCHEDULE YOUR FREE!
86 13303359750
sales@rongan-man.com
sales@rongan-man.com
Toggle Navigation
Waste Item spec: Waste: Cotton white sterilized Cat name:IMPA. Cat no:23 29 01. Waste NA.NA.23 29 01
GLOVES, COTTON WORKING ORDINARY NA.NA.19 01 01
"Battery Chargers. Output AC Power:
Voltage 6-35 v, Ampere 20A. Input
DC Power: Voltage 100 v, Ampere
12.0A" NA.NA.79 26 53
"Torque Tools/Torque Wrenches,
preset type, CAPACITY (MINIMUM
20 to MAXIMUM 100) N.m-cm. Sq.
Drive 12.7mm" NA.NA.61 14 39
"Torque Tools/Torque Wrenches.
Torque wrench, preset type,
CAPACITY (MINIMUM 60 to
MAXIMUM 420) N.m-cm. Sq. Drive
19.0mm" NA.NA.61 14 33
Hand Snips NA.NA.61 17 74
Calf Skin Working Gloves NA.NA.19 01 12
"Door closer, parallel type, LEFT OR
RIGHT HAND USE,
MAXIMUM DOOR WEIGHT 60-
80(kgs)" NA.NA.49 06 24
"Faceshield, with forehead protection.
Standard" NA.NA.33 11 44
"Spare shield, polycarbonate, for
forehead protection type faceshield" NA.NA.33 11 48
PLASTIC CHIPPING GOOGLE ANTI FOG NA.NA.33 11 42
"Rechargeable LED Hand Lamps.
Model- XT-50" NA.NA.33 06 12
Air Dusster Long Nose NA.NA.27 06 12
Air Dusster Long Nose NA.NA.27 06 13
Rags, White 100% Cotton NA.NA.23 29 07
CORDLESS DRILL DRIVER NA.NA.59 09 01
"High Pressure Cleaners Air Powered
Heavy Duty. Power Supply AC 110V.
1 ph 60Hz. Model C-11OE. Power
Consumption 2 .2 KW . Working
Pressure 110 bar" NA.NA.59 08 57
"Wire Brushes, Standard Handle.
Straight Handled Standard Length
270 mm" NA.NA.51 06 60
Brush Counter Black Hair NA.NA.51 06 46
"Paint Roller with Handle. Nylon. Size
mm. 100." NA.NA.51 03 01
"Spare Paint Roller. Replacements.
Nylon. Size 100 mm." NA.NA.51 03 49
ANGLE RADIATOR BRUSH 25 MM NA.NA.51 01 65
Flat Paint Brushes. Width 25 mm. NA.NA.51 01 01
SINGLE HEAD RACHET 19 NA.NA.61 10 31
"Hand Snips, Curved Edge. Length
mm 240mm" NA.NA.61 17 81
"Screw Plate Sets. Thread Cutting
Size; M - 2.0, 2.5, 3.0, 3.5, 4.0, 5.0,
6.0, 7.0 Model D48," NA.NA.63 22 08
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)" NA.NA.63 22 10
"Screw Plate Sets. Thread Cutting
Size; ¼, 5/ 16. 3/8, 7/16, ½, 518,
314, 718, 1, 1-1/8, 1-1 /4, 1-3/8, 1-
1/2 Model OK50, 4, 5, 6, ~ 8, 9, 10,
11, 12" NA.NA.63 22 38
"Step Drills. Model ST- 1, Size mm. 4,
5, 6, ~ 8, 9, 10, 11 , 12" NA.NA.63 38 01
STEP DRILL NA.NA.63 38 02
"Ratchet Bolt Threaders. Capacity inch
¼-1, No. 00- RB" NA.NA.61 66 54
"Non-Spark Ball Pein Hammers.
Nominal Size 1″. Weight 453 grm." NA.NA.61 57 04
"Non-Spark Double Face Hammers
with Handle. Nominal Size 5. Weight
2.27 kg" NA.NA.61 57 32
"Non-Spark Double Face Hammers
with Handle. Nominal Size 12. Weight
5.45 kg" NA.NA.61 57 36
"Non-Spark Cold Chisels. Beryllium
Cooper Alloy.
Size mm. 20 x 200" NA.NA.61 58 09
"Gear & Wheel Pullers, 3-Arm.
MAXIMUM SPREAD mm 125" NA.NA.61 50 70
"Gear & Wheel Pullers, 3-Arm.
MAXIMUM SPREAD mm 300" NA.NA.61 50 72
Spur gear chain hoists NA.NA.61 50 09
"Link Chain Hand-Lever Hoists.
Capacity Tons 1-1/2" NA.NA.61 50 02
"Resinoid Cut-Off Wheels,
OUT DIAM- 150 x THICKNESS-1 x
HOLE DIAM- 22mm, 4,300 mtr/min" NA.NA.61 48 60
RESENOID OFFSET GRINDING WHEEL NA.NA.61 48 04
"Machinist Files. Flat. Cut-Second Cut.
Length- 200mm" NA.NA.61 43 09
"Machinist Files. Half Round. Cut-
Second Cut. Length- 200mm" NA.NA.61 43 35
"Machinist Files. Round. Cut-Second
Cut. Length- 200mm" NA.NA.61 43 64
"Machinist Files. Square. Cut-Second
Cut. Length- 200mm" NA.NA.61 43 92
"Machinist Files. Triangle. Cut-Second
Cut. Length- 200mm" NA.NA.61 44 23
"Milling Vises. Milling F Type. Jaw –
153x112x43. (Fixed Base)- 465 x 183
x 109" NA.NA.61 37 43
"Silicon Paper, Abrasive Waterproof
(Crocus Paper). Size : 230 x 280 mm.
Grit 120" NA.NA.61 47 68
"Silicon Paper, Abrasive Waterproof
(Crocus Paper). Size : 230 x 280 mm.
Grit 80" NA.NA.61 47 66
"Grinding Wheel Dressers. Dresser
Grinding Wheel." NA.NA.61 46 06
Wheel Extra for Grinding Dresser 50’s NA.NA.61 46 07
"Electroplated Diamond. Needle File
Set. File set, needle, electroplated
diamond 10’s" NA.NA.61 45 43
HOSE BANDS , S.STEEL, 15-24MM NA.NA.61 40 54
HOSE BANDS , S.STEEL, 32-44MM NA.NA.61 40 56
Hose bands/ pipe clamps NA.NA.61 40 58
Punching tool sets 16 pcs Punching dies (6,7,8,9,10,11,12,16,19,22,25,28,32,35,38.) NA.NA.61 30 56
"Weicon Cable & Wire Strippers.
Model – Cable Stripper S4-28 Multi" NA.NA.61 17 31
"Electric Blowers / Exhausters. Model-
EFI75. Motor 115V" NA.NA.59 15 01
"Jig saw, electric portable, CUTTING
CAPACITY – 13 mm, POWER – AC
110V Single Phase, MODEL BOSH" NA.NA.59 11 86
Spare Blades For Electric Jig Saws NA.NA.59 11 73
SPARE BLADE FOR ELECTRIC JIG SAW NA.NA.59 11 77
"Electric Bench Grinders. Wheel Size
mm205 x 19 x 15.88. Motor 600 w.
AC 110V Sin.11te Phase. For Wheel
Diam 205mm" NA.NA.59 10 52
"Hacksaw Blade High Speed Steel
Length 300 mm." NA.NA.61 34 55
"Strong Hand Magnets. Size HxWxT
105x75x11. No 7.5" NA.NA.61 32 81
(-) SLOTTED SCREW DRIVER 150MM NA.NA.61 22 65
SLOTTED SCREWDRIVER - INSULATED, 250MM X 10MM NA.NA.61 22 67
(+) PHILIPS SCREW DRIVER 150MM NA.NA.61 22 75
Screwdriver plastic handle( no.4-200) NA.NA.61 22 76
"Vise Grip Combination Pliers (Mole
Grip Wrenches). Length 175 mm" NA.NA.61 16 42
SINGLE HEAD RACHET 17 NA.NA.61 10 30
RATCHET HANDLES, NA.NA.61 04 05
COMPACT GAS TORCHES (COMPLETE SET) NA.NA.61 70 16
SPARE GAS CARTRIDGE NA.NA.61 70 17
"Pipe Wrenches Bahco. Universal Pipe
Wrench. Length mm- 280.
Max Opening 36mm.
Bahco Type No. 141" NA.NA.61 61 12
"Pipe Wrenches Bahco. Universal Pipe
Wrench. Length mm- 370.
Max Opening 52mm.
Bahco Type No. 142" NA.NA.61 63 14
"Non-Spark Side Cutting Plie. Length
mm 180." NA.NA.61 58 67
"Non-Spark Ball Pein Hammers.
Nominal Size ½″. Weight 225 grm." NA.NA.61 57 02
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-4 Kg/cm². G ¼″" NA.NA.65 32 13
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-6 Kg/cm². G ¼″" NA.NA.65 32 16
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-6 Kg/cm². G ½″" NA.NA.65 32 17
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-4 Kg/cm². G ½″" NA.NA.65 32 14
"Hose valve, Angle Hose Valve,
bronze, PRESSURE 10 kg,
JIS F-7334, SIZE 15mm, Threads
M42x2, L -73,mm, D 92mm, Bolts :
Pitch- 70mm, Number -4, Hole-
15mm." NA.NA.75 11 07
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 75-
100mm" NA.NA.65 03 44
"Pressure gauge. Bottom Connection
with Back
Flange. 0-600" NA.NA.65 31 98
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 36
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 mtr) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 25-
59mm" NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)" NA.NA.63 22 37
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)" NA.NA.63 22 10
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
"Open & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8x8, 10x10, 12x12,
13x13, 14x14, 17x17,19x19,
21x21,22x22, 24x24 ) 10’s" NA.NA.61 05 31
Brass Threaded Caps. Size. ½″ NA.NA.73 21 79
Brass Threaded Caps. Size, ¾″ NA.NA.73 21 80
Brass Threaded Caps. Size 1″ NA.NA.73 21 81
"Square Head Steel Threaded Plugs.
¾″" NA.NA.73 17 80
"Square Head Steel Threaded Plugs.
1″" NA.NA.73 17 81
Copper Tubes (5.5mtrs) NA.NA.71 14 04
"Copper tube, seamless, 8 mm, 1.2
mm, 10 mtr" NA.NA.71 14 11
"Bolt, hex head, steel, ungalv., half
threaded, m5x60mm" NA.NA.69 01 67
"Bolt, hex head, steel, ungalv., half
threaded, m6x40mm" NA.NA.69 01 93
Devcon Stainless Steel Putty (ST) NA.NA.81 22 92
Silicone Gaskets NA.NA.81 26 71
"GUN FOR SILICONE SEALANT (350 GR)
TABANCA BIR ADET KULLANIMDA VARDIR VE ESKI DURUMDADIR." NA.NA.81 26 03
Teflon Seal Tape,Width 20mm,Thick 0.1mm,10mtrs/Roll NA.NA.81 25 02
Adjustable Pipe Repair Clamps 10 pcs/case NA.NA.81 23 66
"Pilot Non-Asbestos
Jointing Pilotseal 172. 1
x1.500x1.500 mm" NA.NA.81 12 82
"Pilot Non-Asbestos
Jointing Pilotseal 172.
1.5x1.500x1.500 mm" NA.NA.81 12 84
"Pilot Non-Asbestos
Jointing Pilotseal 172. 2x
1.500x1.500 mm" NA.NA.81 12 83
"Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 21 Mm.
Overall Length 290 mm." NA.NA.61 10 32
"Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 22 Mm.
Overall Length 290 mm." NA.NA.61 10 33
"Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 22 Mm.
Overall Length 310 mm." NA.NA.61 10 34
"Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 27 Mm.
Overall Length 330 mm." NA.NA.61 10 36
SINGLE HEAD RACHET 30 NA.NA.61 10 37
SINGLE HEAD RACHET 32 NA.NA.61 10 38
OPEN 12 POINT BOX WRENCH SET 15 ANGLE OPEN END WRENCHES SET NA.NA.61 05 34
Pneumatic drun pumps, type: TO, hose: Ø32mm x 3M NA.NA.59 16 53
"Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 1″" NA.NA.75 51 05
Ball valve NA.NA.75 24 01
Ball valve NA.NA.75 24 02
"Forged Brass Screwed End
Ball Valves. ¾″" NA.NA.75 24 03
"Forged Brass Screwed End
Ball Valves. 1″" NA.NA.75 24 04
"Screw Down Check Globe Valves.
Bronze,16 kg/cm2, SIZE- 15. Face to
Face 110, Flange Diam, -95. Flange
Bolt Hole : Pitch- 70, Number-4,
Hole-15. F-7409" NA.NA.75 10 01
"Screw down check valve, ANGLE,
bronze,
5 kgf/cm2, SIZE 32, Face to Face-
80, Flange Diam.-115, Flange Bolt
Hole: Pitch- 90, Number- 4, Hole-
15mm, Angle Valve F-7352" NA.NA.75 10 64
"Plastic Diaphragm Pumps.
Husky.515. Connection Size ½″." NA.NA.59 17 67
"Non-Spark 12 Point Double 10x12
End Wrenches" NA.NA.61 55 13
"Non-Spark 12 Point Double 10x13
End Wrenches" NA.NA.61 55 14
"Non-Spark 12 Point Double 12x14
End Wrenches" NA.NA.61 55 15
"Non-Spark 12 Point Double 14x17
End Wrenches" NA.NA.61 55 16
"Non-Spark 12 Point Double 17x19
End Wrenches" NA.NA.61 55 17
"Non-Spark 12 Point Double 17x21
End Wrenches" NA.NA.61 55 18
"Non-Spark 12 Point Double 19x21
End Wrenches" NA.NA.61 55 19
"Pressure Reducing Valve (15 DIN)
with threaded connection.
Stainless steel. Type of Pressure
Rating LOW STANDARD.
Control pressure from 0.5 kg" NA.NA.75 69 19
Pneumatic Vakuum Cleaner V 300 hose 25mm suction capasity 1,2m3 NA.NA.59 07 21
"Water Activated Fiberglass Tapes
for Pipe Repair" NA.NA.81 24 51
"Syntho -Glass. 5,08sm/1.524m
Weicon UW Cream Wet Surface" NA.NA.81 23 34
"Pilotpack 67 Packings
for Sea and Fresh Water, 5mm" NA.NA.81 07 02
"Pilotpack 67 Packings
for Sea and Fresh Water, 6.5mm" NA.NA.81 07 03
"Pilotpack 67 Packings
for Sea and Fresh Water, 8mm" NA.NA.81 07 04
Ball Bearing. 6309ZZ C3 NA.NA.77 07 60
Ball Bearing. 6209ZZ C3 NA.NA.77 06 10
"Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 3/8″" NA.NA.75 51 02
"Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ½″" NA.NA.75 51 03
"Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ¾″" NA.NA.75 51 04
BRASS FLARES UNIONS 6 MM NA.NA.73 40 22
BRASS FLARES MALE CONNECTION 6MM NA.NA.73 40 03
BRASS FLARES MALE CONNECTION 8MM NA.NA.73 40 05
"Brass flareless union tee, TUBE 0.0-
6mm, NUT THREAD SIZE- ¼" NA.NA.73 40 62
"Brass Sleeves
for Flareless Tube Fitting. Tube OD-
6mm, Length-9mm" NA.NA.73 41 02
"Brass Nuts for Flareless
Tube Fitting, OD-6mm, Nut Thread-
12-1,5" NA.NA.73 41 12
"Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min" NA.NA.61 48 20
Brass Threaded Unions. Size-1/8″ NA.NA.73 22 61
Brass Threaded Unions, Size ½″ NA.NA.73 22 62
Brass Threaded Unions. Size 3/8″ NA.NA.72 22 63
Brass Threaded Unions. Size ¾″ NA.NA.72 22 64
Brass Threaded Unions, Size 1″ NA.NA.72 22 65
"Needle File Sets. LENGTH- 215 mm,
5 PCS Set, 2nd Cut" NA.NA.61 45 31
"Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min" NA.NA.61 48 20
"Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min" NA.NA.61 48 20
Brass Threaded Caps. Size 3/8″ NA.NA.73 21 78
"Non-Spark 12 Point Double 21x26
End Wrenches" NA.NA.61 55 20
"Non-Spark 12 Point Double 26x32
End Wrenches" NA.NA.61 55 21
"Non-Spark 12 Point Double 32x35
End Wrenches" NA.NA.61 55 22
"Stainless Steel Ratchet Handles
for Socket Wrenches" NA.NA.61 68 81
Rachet handles NA.NA.61 68 82
"Solenoid Valve, JDSPE6-15WLMP, 15
A,Water, Nor. Close. 110V, 50/60
Hz.Operation P. 0-0.0 Mp. Proof Test
P- 1.5 Mp"
"90° Angle Thermometers, SIKA,
2728, casing size, 200 x 36 mm,
immersion length 63 mm, catalogue
No.2722-351106321, 0- 100," NA.NA.65 20 04
"90° Angle Thermometers, SIKA,
2728, casing size, 200 x 36 mm,
immersion length 63 mm, catalogue
No.2722-351106321, 0- 160," NA.NA.65 20 07
"Bolt, hex head, steel, ungalv., half
threaded, m8x40mm" NA.NA.69 02 23
Hexagon Nuts m6x40 NA.NA.69 28 04
Hexagon Nuts m8x40 NA.NA.69 28 05
"Resistance Thermometer,
screw-in type with
interchangeable insert
1810- Type BM" NA.NA.65 25 60
"Thermalimager, Range: -30°C to
650°C" NA.NA.65 27 55
"Pressure gauge, glycerin filled ,round
rim case
Vibration service Square shank
PF3/8”, diam. 75 mm,
0 – 15 kgf/cm2" NA.NA.65 15 16
"Pressure gauge. BottomConnection
with Back Flange. Pressure range
0-6 kgf/cm2, PF - 3/8”, diam. 75 mm" NA.NA.65 31 67
"Pressure gauge. Bottom Connection
with Back
Flange. 0-400, PF - 1/4”," NA.NA.65 31 93
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-4 Kg/cm². G ¼″" NA.NA.65 32 13
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-6 Kg/cm². G ¼″" NA.NA.65 32 16
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-6 Kg/cm². G ½″" NA.NA.65 32 17
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-4 Kg/cm². G ½″" NA.NA.65 32 14
"Hose valve, Angle Hose Valve,
bronze, PRESSURE 10 kg,
JIS F-7334, SIZE 15mm, Threads
M42x2, L -73,mm, D 92mm, Bolts :
Pitch- 70mm, Number -4, Hole-
15mm." NA.NA.75 11 07
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 75-
100mm" NA.NA.65 03 44
"Pressure gauge. Bottom Connection
with Back
Flange. 0-600" NA.NA.65 31 98
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 36
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 mtr) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 25-
59mm" NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)" NA.NA.63 22 37
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)" NA.NA.63 22 10
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
"Open & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8x8, 10x10, 12x12,
13x13, 14x14, 17x17,19x19,
21x21,22x22, 24x24 ) 10’s" NA.NA.61 05 31
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-4 Kg/cm². G ¼″" NA.NA.65 32 13
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-6 Kg/cm². G ¼″" NA.NA.65 32 16
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-6 Kg/cm². G ½″" NA.NA.65 32 17
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-4 Kg/cm². G ½″" NA.NA.65 32 14
"Hose valve, Angle Hose Valve,
bronze, PRESSURE 10 kg,
JIS F-7334, SIZE 15mm, Threads
M42x2, L -73,mm, D 92mm, Bolts :
Pitch- 70mm, Number -4, Hole-
15mm." NA.NA.75 11 07
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 75-
100mm" NA.NA.65 03 44
"Pressure gauge. Bottom Connection
with Back
Flange. 0-600" NA.NA.65 31 98
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 36
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 mtr) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 25-
59mm" NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)" NA.NA.63 22 37
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)" NA.NA.63 22 10
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
"Open & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8x8, 10x10, 12x12,
13x13, 14x14, 17x17,19x19,
21x21,22x22, 24x24 ) 10’s" NA.NA.61 05 31
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-4 Kg/cm². G ¼″" NA.NA.65 32 13
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-6 Kg/cm². G ¼″" NA.NA.65 32 16
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-6 Kg/cm². G ½″" NA.NA.65 32 17
"Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-4 Kg/cm². G ½″" NA.NA.65 32 14
"Hose valve, Angle Hose Valve,
bronze, PRESSURE 10 kg,
JIS F-7334, SIZE 15mm, Threads
M42x2, L -73,mm, D 92mm, Bolts :
Pitch- 70mm, Number -4, Hole-
15mm." NA.NA.75 11 07
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 75-
100mm" NA.NA.65 03 44
"Pressure gauge. Bottom Connection
with Back
Flange. 0-600" NA.NA.65 31 98
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 36
"Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40" NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 mtr) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
"Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 25-
59mm" NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)" NA.NA.63 22 37
"Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)" NA.NA.63 22 10
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
"Open & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8x8, 10x10, 12x12,
13x13, 14x14, 17x17,19x19,
21x21,22x22, 24x24 ) 10’s" NA.NA.61 05 31