欢迎您来到RONGAN-Man网站!
CALL TO SCHEDULE YOUR FREE!
86 13303359750
sales@rongan-man.com

caterpillar 320b-s6k-Cylinder Block

caterpillar 320b-s6k-Cylinder BlockModel NO.: 125-2964 (CAT320B/S6K )Bucket Capacity: >1.5m³Condition: NewDelivery Time: 3-5 Working DaysTrademark: CATERPILLARType: Wheel ExcavatorBucket: Grab ShovelDrive Type: Electric DriveSize: Medium-Size
Products Inquiry

Product Details

caterpillar 320b-s6k-Cylinder Block

 Model NO.: 125-2964 (CAT320B/S6K )

 Bucket Capacity: >1.5m³

 Condition: New

 Delivery Time: 3-5 Working Days

 Trademark: CATERPILLAR

 Type: Wheel Excavator

 Bucket: Grab Shovel

 Drive Type: Electric Drive

 Size: Medium-Sized

 Material: Cast Iron

 Transport Package: Nature Packing with Wooden Box

 HS Code: 8409919990

the connecting rod small end bushing,caterpillar 320b connecting rod bushing,caterpillar 320b connecting rod bearing,caterpillar 320b

(4) the ,caterpillar 320b-s6k-Cylinder Block bearings were burned to death. If the impeller and water seal are removed, the ,caterpillar 320b-s6k-Cylinder Block rotor can not be moved by hand, that is, the bearing is burned to death. New bearings should be replaced.(5) the wear of ,caterpillar 320b-s6k-Cylinder Block bearings is serious (loosening). When electrified, the rotor of the ,caterpillar 320b-s6k-Cylinder Block is absorbed by the magnetic force on the core of the stator coil, and the rotor can not be rotated. The bearing should be replaced.(6) ,caterpillar 320b-s6k-Cylinder Block bearing wear loose ,caterpillar 320b-s6k-Cylinder Block around the rotor sucked symptoms. The cushion should be added at the bearing ,caterpillar 320b-s6k-Cylinder Block (such as the skin of the can, etc.). It is necessary to use electric welding to fill the shaft when necessary, and then to the standard of the car.(7) the loosening (displacement) of the stator coil of the ,caterpillar 320b-s6k-Cylinder Block should be reduced and strengthened.(8) the mechanical water seal is dead, which causes the ,caterpillar 320b-s6k-Cylinder Block to be unable to start. A new water seal should be replaced.(9) the connecting bolt between the pump body and the ,caterpillar 320b-s6k-Cylinder Block is loose, causing the edge of the impeller. The pump body should be adjusted to tighten the bolt.(10) the pump body side because frozen bulge outwards caused by increased water absorption cavity. The side cover should be replaced.