021328Y-trawl equipment

 CABLE WINCH UM 22.005 Drw.# 223-119 

 "Timing Chain 5/8"" x 2575, Pos.#16, Drw.#216-041

(#1182/2)" NA.NA.950-240-04

 "Valve Nidle for over Flow Valve F46B

(#1182/6)" NA.NA.108-633

 "U-Ring N12 17 SIMIRIT for Valve F46B

(#1182/6)" NA.NA.801-035-13

 "U-Ring 11,91 x x2,62 NBR70 for Valve F46B

(#1182/6)" NA.NA.801-027-41

 "Guide Vane

(#1182/2)" NA.NA.130-201

 Net Drum Winch, Type: NETM 6300U 

 "O-Ring, Pos.#4,Drw.# 28462

(#70-22/1 SMT)" NA.NA.801-032-54

 "Soh. Roller bearing 23940C/W33, Pos.#1, Drw.#28463

(#70-22/2 SMT)" NA.NA.801-180-56

 "V-ring, V-220A, pos.#3, Drw.#28463

(#70-22/3 SMT)" NA.NA.800-061

 Net Drum Winch, Type: NETM 6300U 

 "Pressure Rel. Valve  F212

(#716/2)" NA.NA.365-327-00 or 800-002

 HYD.MOTOR M2202-B 

 "Vane (oversize), Pos.#3, Drw.#106-162

(#70-22/16 SMT)" NA.NA.103-14

 "O-Ring 406 x 4 NBR70 SHORE, Pos.#5, Drw.#106-162

(#70-22/2 SMT)" NA.NA.800-044

 "Stuffing arr. Pos.#11, Drw.#106-162

(#70-22/1 SMT)" NA.NA.119-309

 "O-ring 219,3 x 5,7 NRB70 SHORE

(#70-22/2 SMT)" NA.NA.801-031-54

 "Roller bearing SKF NJ226, Pos.#20, Drw.#106-162

(#70-22/2 SMT)" NA.NA.801-159-11

 "O-Ring 98,02 x 3,53 NBR 70 NTRIL

(#716/6)" NA.NA.801-029-58

 CONTROL VALVE R8\E17 

 "Stripper AS 30-40-5-8 SIMRIT

(#70-22/15 SMT)" NA.NA.801-052-24

 "Bushing, Pos.#13, Drw.# 122-88

(#70-22/4 SMT)" NA.NA.102-598

 "Bushing, Pos.#34, Drw.# 122-88

(#70-22/4 SMT)" NA.NA.102-592

 Valve E14 

 "Non Return Valve F133, Pos.#1, Drw.# 133-156

(#70-22/2 SMT)" NA.NA.107-385

 "Spring, Pos.#4, Drw.#133-156

(#70-22/2 SMT)" NA.NA.12-195

 "O-ring, 100,97 x 5,34 NRB70, Pos.#4, Drw.#133-156

(#70-22/6 SMT)" NA.NA.801-030-28

 "O-ring 98,84 x 3,53 NRB70, Pos.#7, Drw.# 133-156

(#70-22/6 SMT)" NA.NA.801-029-57

 Type Hydr. Brattvaag/D.M.63, 30 tons, 0-47 m/min

 "Seal set for motor M 6300

(#219/3) (716/2)" NA.NA.3401

 "Seal kit

(#219/3)" NA.NA.3402

 "Brake lining 102 x 9,5 x 3960

(#12/2) (#168/2)" NA.NA.950-073-28

 Spooling device 

 "Piston Ring

(#12/2)" NA.NA.801-441-15 (801-380-15)

 "O-Ring 49,5 x 3,00

(#12/2)" NA.NA.801-028-27

 "O-Ring 238,00 x 5

(#12/2)" NA.NA.801-177-79

 "Guide Vane drawing # 199-197, shaft dia.-170mm, pos.8

(#14/2) (#08/4) (197/2)" NA.NA.197-314

 "Pressure reduction valve R11-300-RNMD Drw.196-095 pos.14

(#14/1)" NA.NA.800-782

 "O-RING 110,50х5.34 DRAW 171-231

(#1182/10)" NA.NA.801-030-32

 "Spring

(#1182/4)" NA.NA.041-796

 "Seal Washer

(#1182/3) (#716/100)" NA.NA.801-038-09

 "O-Ring

(#1182/8)" NA.NA.801-023-42

 Control Valve 

 "Set of seals for E20 Control Valve

(#168/2) (#236/10 SMT)" NA.NA.2952

 "Mantle ring 60x58x7.3 (pos.19 drw. #131-039)

(#1182/3)" NA.NA.801-194-27

 "Mantle ring 14x16x3 (pos.24 drw. #131-039)

(#1182/6)" NA.NA.801-195-04

 "Packing ring 400-019-4490 (pos.56, drw. #114-24)

(#1182/6)" NA.NA.801-038-29

 "Stripper AS 12-20-4-6 SIMRIT

(#1182/6)" NA.NA.801-052-05

 "RETAINING RING 30х1,5 (# 95143)

(#1182/6)" NA.NA.801-091-30

 "RETAINING RING 50х2 (# 95143)

(#1182/6)" NA.NA.801-091-41

 "Piston Guide 35x2,5x170mm

(#1182/2)" NA.NA.950-117

 "SEAL RING 400-126-4490

(#1182/6)" NA.NA.801-038-17

 "Vane pin, Pos.# 29, Drw.# 111-112 FOR MOTOR 6300B

(#789/32) (#70-22/16 SMT) (#787/16)" NA.NA.102-383

 "Stuffing arr Pos.#20, Drw.# 111-112 FOR MOTOR 6300B

(#789/2) (#70-22/2 SMT) (#787/2)" NA.NA.119-365-AB

 "Seal ring 330 x 370 x 18

(#789/2)" NA.NA.801-047-32

 "Seal Ring

(#789/4)" NA.NA.801-204-65

 "O-ring 359,30x5,70  NS1178

(#789/2)" NA.NA.801-031-61

 "TALLOW HAMP GASKET 3/8"" а-х110

(#789/2)" NA.NA.950-118-03

 "O-Ring, Packing cord  dia 4х/1830/577 Pos.#11, Drw.#111-112 FOR MOTOR 6300B

(#789/4) (#70-22/12 SMT)" NA.NA.800-040

 "Chain, pos.13 , 10 feet per reel

(#168/2)" NA.NA.950-240-06

 "Joint link

(#168/4)" NA.NA.800-928

 "Air bleed plug M12 x 1,5

(#168/20) (#716/30)" NA.NA.108-126-02

 "Drw.106-161 pos.28   air bleed  plug seal  400-021-4490 Dowty

(#168/30)" NA.NA.213-101

 "Non return valve P-RVV 30SM-WD, 2,5bar.

(#168/2)" NA.NA.801-381-29

 "PRESSURE GAUGE R 1/4"" 0-160 KP/CM2 M/DYSY

(#168/10)" NA.NA.801-244-06

 "O-ring

(#168/6) (#70-22/1 SMT)" NA.NA.801-031-58

 "O-ring

(#168/6)" NA.NA.801-032-41

 "O-ring

(#168/6)" NA.NA.801-032-24

 Screw Pump SN 80 

 "Shaft seal set, SN 80 pos. # 107, #108

(#716/4)" NA.NA.82133

 Screw Pump SN 2900 

 "O-Ring

(#716/6)" NA.NA.801-031-59

 "Seal set for motor M 6300

(#219/3) (716/2)" NA.NA.3401

 BRATTVAAG HYDRAULIK VALVE E1216/E1288-A 

 "O-Ring 124,2 x 5,7 Pos. #13 Drw. # 133-155 FOR E14 Valve Pos.#13, Drw.# 133-156

(#236/6 SMT) (#70-22/6 SMT)" NA.NA.801-031-36

 "O-Ring 437 x 5,7 Pos. #12 Drw. # 158-021

(#236/4 SMT)" NA.NA.801-031-93

 "O-Ring 149,2 x 5,7 Pos. #22 Drw. # 158-021

(#236/4 SMT)" NA.NA.801-031-41

 "Packing Cord 1354 x 5,7 Pos. # 24 Drw. # 158-021

(#236/4 SMT)" NA.NA.950-058-14

 Brattvaag RETRIEVER WINCHES AKMG 8 

 "O-Ring 58,74 x 3,53

(#235/1 SMT)" NA.NA.801-029-35

 "Safety Valve F106B

(#235/1 SMT)" NA.NA.F106B Drw.# 117-15

 For Hyd. motor MG8-B 

 "Vane G3 (Fagersta W221) (Oversize) Pos.#2, Drw.# 218-005

(#70-22/16 SMT)" NA.NA.094-386

 "O-Ring 134,5 x 3 NRB70, Pos.#4, Drw.# 218-005

(#70-22/4 SMT)" NA.NA.801-028-50

 "O-ring, 119,20 x 5,7 NBR 70, Pos.#6, Drw.#218-005

(# 715/5) (#70-22/4 SMT)" NA.NA.801-031-35

 "Stuffing arr. For motor MG8-B

(#70-22/2 SMT)" NA.NA.107-248

 "Vane pin, Pos.# 29, Drw.# 111-112 FOR MOTOR 6300B

(#789/32) (#70-22/16 SMT) (#787/16)" NA.NA.102-383

 "O-Ring 215,50 x 3,53 NRB70 Pos.# 15, Drw.# 218-005

(#70-22/2 SMT)" NA.NA.801-029-05

 "Roller bearing SKF NU312E Pos.#23, Drw.# 218-005

(#70-22/4 SMT)" NA.NA.801-095-52

 TRAWL WINCHES 2-D2M6300U 

 "Gasket, Pos.# 9, Drw. # 151-291

(#70-22/1 SMT)" NA.NA.151-267

 "Gasket, Pos.# 9, Drw. # 159-021

(#70-22/1 SMT)" NA.NA.151-271

 "Gasket, Pos.#10, Drw. # 151-291

(#70-22/1 SMT)" NA.NA.151-269

 "Gasket, Pos.# 25, Drw. # 194-159

(#70-22/1 SMT)" NA.NA.151-268

 "Gasket, Pos.# 12, Drw. # 194-159

(#70-22/2 SMT)" NA.NA.151-266

 "Set Collar, Pos.#1, Drw. #108-340

(#70-22/2 SMT)" NA.NA.115-503

 "Coupling Bolt, Pos.#2, Drw. #108-340

(#70-22/2 SMT)" NA.NA.108-341

 "Bushing, Pos.#3, Drw. #108-340

(#70-22/2 SMT)" NA.NA.102-162

 "V-ring V-275A FORSHEDA,  Pos.#4, Drw.#159-021

(#70-22/2 SMT) (#1182/4)" NA.NA.800-012

 "Seal ring  SMIM280 310/15 GACO, Pos.#5, Drw.#159-021

(#70-22/1 SMT)" NA.NA.801-047-24

 "Roller bearing NU1052 SKF, Pos.#6, Drw.#159-021

(#70-22/1 SMT)" NA.NA.801-097-34

 "Sph.roller bearing  23034CK/W33, Pos.#7, Drw.#151-291

(#70-22/1 SMT)" NA.NA.801-145-14

 "Roller bearing  22220С, Pos.#9, Drw.#194-159

(#70-22/2 SMT)" NA.NA.801-129-48

 "Rod wiper AS 170-185-10-14 SIMRIT, Pos.#37, Drw.#194-159

(#70-22/2 SMT)" NA.NA.801-053-02

 "Sph.roller bearing  23034C/W33, Pos.#4, Drw.#167-121

(#70-22/1 SMT)" NA.NA.801-130-34

 "Seal ring DPSM-180-210-15, Pos.#7, Drw.#167-121

(#70-22/1 SMT)" NA.NA.801-047-11

 "Seal ring DPSM-100-125-12, Pos.#5, Drw.#208-073 (SNH 2900 R40??? Allweiller pump)

(#08/8) (#70-22/8 SMT)" NA.NA.801-046-43

 "3/2 valve Mo tona S560/42 Pos.#7, Drw.#   0001-0441 PEILO TEKNIKK A/S

(#716/2) (#1182/4)" NA.NA.812-071

 "Vane FOR M6300

(#1182/2)" NA.NA.92469

 "Vane pine ID RRM FOR M6300

(#1182/2)" NA.NA.207126

 "Joint link

(#168/4)" NA.NA.800-928

 "Chain, pos.13 , 10 feet per reel

(#168/2)" NA.NA.950-240-06

 "Saft Seal kit for M6300

(#789/2)" NA.NA.3397

 "Bearing NUP214ECP, drw.#208-073

(#08/8)" NA.NA.801-250-58

 "Vane standard Pos.#24 Drw.#111-112 FOR MOTOR 6300B

(#70-22/48 SMT) (#789/32) (#787/16)" NA.NA.103-210

 "Seal ring 400-014-4490 DOWTY  (E20A/R8/R11/--) Pos.#27, Drw.#111-112  FOR MOTOR 6300B AND  Pos.#33, Drw.# 106-162 FOR MOTOR M2202-B

(#70-22/12+1 SMT) (#1182/6)" NA.NA.801-038-20

 "Roller bearing SKF NU 234, Pos.#32, Drw.# 111-112  FOR MOTOR 6300B

(#70-22/12 SMT)" NA.NA.801-159-29

 WINCH DMM6300 15 tons at 0-45m/min N1,2 

 "Gland 1006

(#787/2)" NA.NA.87-19

 "Sealing Ring pos. 1.1 BABSL AS 1x170x200 - 14mm SIMRIT

(#787/2)" NA.NA.801-163-08

 WINCH DSM41 15 Tons at 0-65m/min 

 "Spare Part kit

(#219/2)" NA.NA.92460

 "Roller Bearing NU 230 SKF

(#790/2)" NA.NA.801-159-20

 "O-Ring 194,2 x 5,7

(#790/4)" NA.NA.801-031-50

 "Stuffing box arr.

(#790/2)" NA.NA.119-365-CB

 "Gland A806B-150

(#790/2)" NA.NA.094-738

 "Packing

(#790/2)" NA.NA.066-770

 HYDROMOTOR MG4185-A 

 "Vane

(#790/32)" NA.NA.89-312

 "Vane pir

(#790/32)" NA.NA.102-65

 "Packing cord D4 x (1780) 554

(#790/4)" NA.NA.800-041

 CARGO WINCH AM 22 

 "Shaft Seal set for M2202 Hydraulic Motor

(#716/4)  (#1182/2)" NA.NA.3399

 "Seal kit

(#1182/2)" NA.NA.3398

 "Vane Pin, Pos.#1, Drw.#106-162 for Hyd. Motor M2202-B

(#1182/32) (#70-22/8 SMT)" NA.NA.102-146

 "Packing

(#1182/6)" NA.NA.75-760

 Control Valve E2B, for Cargo Winch AM 22.006 

 "Non return valve

(#1182/2)" NA.NA.115-123

 "Valve Guide

(#1182/2)" NA.NA.57-775

 "Spring, Pos.#1

(#1182/2)" NA.NA.42-180

 CABLE WINCH UM2202 

 "Soh. Roller bearing 22220C, Pos.#4, Drw.#167-121

(#70-22/1 SMT)" NA.NA.801-109-48

 "Rod wiper AS 120-130-7-10, Pos.#8, Drw.# 167-121

(#70-22/1 SMT)" NA.NA.801-052-62

 "Seal Ring DPSM 120-150-12, Pos.#7, Drw.# 167-121

(#70-22/1 SMT)" NA.NA.801-046-52